I. Mahmutogullari, O. Cavus, M.S. Akturk, "An exact solution approach for multi-stage risk-averse mixed-integer problems", Annals of Operations Research.. PDF
Y.N. Yetimoglu, M.S. Akturk, "Aircraft and passenger recovery during an aircraft’s unexpected availability", J of Air Transport Management..
C. Ararat, Z. Feinstein, "Set-valued risk measures as backward stochastic difference inclusions and equations", Finance and Stochastics.. PDF
N. Berktas, H. Yaman, "A Branch-and-Bound Algorithm for Team Formation on Social Networks", Informs Journal of Computing.. PDF
K. Goler, M. Bichler, I. Petrakis, "Ascending core-selecting auctions with risk-averse bidders", Group Decision & Negotiation..
O. Arslan, G.C. Kumcu, B.Y. Kara, G. Laporte, "The location and location-routing problem for the refugee camp network design", Transportation Research B..
S.A. Alumur, J.F. Campbell, I. Contreras, B.Y. Kara, V. Marianov, M.E. O'Kelly, "Perspectives on Modeling Hub Location Problems", European J of Operational Research..
B. Bashir, O. Karsu, "Solution approaches for equitable multiobjective integer programming problems", Annals of Operations Research.. PDF
C. Kizilkaya, M.C. Pinar, "Sparse Solutions to an Underdetermined System of Linear Equations via Penalized Huber Loss", Optimization and Engineering.. PDF
O. Alp, A. Sen, "Delegation of stocking decisions under asymmetric demand information", Manufacturing and Service Operations Management.. PDF
B. Rudloff, F. Ulus, "Certainty equivalent and utility indifference pricing for incomplete preferences via convex vector optimization", Mathematics and Financial Economics.. PDF
I.C. Kaya, F. Ulus, "An iterative vertex enumeration method for objective space based vector optimization algorithms", RAIRO Operations Research.. PDF
2021
O. Cavus, A.S. Kocaman, O. Yilmaz, "A risk-averse approach for the planning of a hybrid energy system with conventional hydropower", Computers and Operations Research, 126, 105092-1--15 (2021)
O. Karsu, A. Morton, "Trading off health and financial protection benefits with multiobjective optimization", Health Economics, 30, 55-69 (2021) PDF
O. Karsu, A.S. Kocaman, "Towards the Sustainable Development Goals: A Bi-objective Framework for Electricity Access", Energy, 216, 119305 (2021)
S. Fobi, A.S. Kocaman, J. taneja, V. Modi, "A scalable framework to measure the impact of spatial heterogeneity on electrification", Energy for Sustainable Development, 60, 67-81 (2021)
E. Nadar, M.S. Erturk, "Eco-design of eco-labels with coarse grades", Omega - Int J of Management Science, 99, 102209-1--12 (2021)
2020
T.D. Akturk, C. Ararat, "Portfolio optimization with two coherent risk measures", J of Global Optimization, 78, 597-626 (2020) PDF
C. Ararat, A.H. Hamel, "Lower cone distribution functions and set- valued quantiles form Galois connections", Theory of Probability and Its Applications.. PDF
A. Basu, L. Stettner, "Zero-Sum Markov Games with Impulse Controls", SIAM J on Control and Optimization, 58, 580-604 (2020) PDF
M.K. Sahin, O. Cavus, H. Yaman, "Multi-stage stochastic programming for demand response optimization", Computers and Operations Research, 118, 104928-1--13 (2020)
B. Urlu, N. Erkip, "Safety Stock Placement for Multi-Echelon Serial Systems Under Supply and Process Uncertainty", Flexible Services and Manufacturing Journal, 32, 395-424 (2020) PDF
E.Z. Demirci, N. Erkip, "Designing intervention scheme for vaccine market: a bilevel programming approach", Flexible Services and Manufacturing Journal, 32, 453-485 (2020) PDF
R. Kian, E. Berk, U. Gurler, H. Rezazadeh, B. Yazdani, "The effect of economies-of-scale on the performance of lot-sizing heuristics in rolling horizon basis", Int J of Production Research.. PDF
S. Poormoaied, U. Gurler, E. Berk, "An exact analysis on age-based control policies for perishable inventories", IISE Transactions., 1-25 (2020) PDF
E. Berk, U. Gurler, S. Poormoaied, "On the $$\varvec {} $$ policy for perishables with positive lead times and multiple outstanding orders", Annals of Operations Research, 284, 81-98 (2020) PDF
E. Berk, U. Gurler, S. Poormoaied, "On the (Q,r) Policy for Perishables with Positive Lead Times and Multiple Outstanding Orders", Annals of Operations Research, 284, 81-98 (2020) PDF
Y. Karpat, U. Karaguzel, O. Bahtiyar, "A thermo-mechanical model of drill margin-borehole surface interface contact conditions in dry drilling of thick CFRP laminates", Int J of Machine Tools and Manufactuıre, 15, 103565-1--15 (2020)
O. Karsu, H. Erkan, "Balance in resource allocation problems: a changing reference approach", OR Spectrum, 42, 297-326 (2020) PDF
A.S. Kocaman, E. Ozyoruk, S. Taneja, V. Modi, "A stochastic framework to evaluate the impact of agricultural load flexibility on the sizing of renewable energy systems", Renewable Energy, 152, 1067-1078 (2020)
Y-J. Chen, T. Dai, C.G. Korpeoglu, E. Korpeoglu, O. Sahin, C.S. Tang, S. Xiao, "Innovative Online Platforms: Research Opportunities", Manufacturing and Service Operations Management, 22, 429-643 (2020) PDF
H. Avci, K. Gokbayrak, E. Nadar, "Structural results for average-cost inventory models with Markov-modulated demand and partial information", Production and Operations Management, 29, 156-173 (2020) PDF
E. Nadar, B.E. Kaya, K. Goler, "New product diffusion in closed-loop supply chains", Manufacturing and Service Operations Management., 1-18 (2020) PDF
L. Onural, M.C. Pinar, C. Firtina, "Modeling Economic Activities and Random Catastrophic Failures of Financial Networks via Gibbs Random Fields", Computational Economics.. PDF
D. Akkaya, M.C. Pinar, "Minimizers of Sparsity Regularized Huber Loss Function", J of Optimization Theory and Applications, 187, 205-233 (2020) PDF
C. Arbib, M.C. Pinar, F. Rossi, A. Tessitore, "Codon optimization by 0-1 linear programming", Computers and Operations Research, 119, 104932-1--11 (2020)
A. Sen, K. Kargar, E. Akgun, M.C. Pinar, "Codon optimization: a mathematical programing approach", Bioinformatics, 36, 4012-4020 (2020) PDF
N. Sahin, "4-generated pseudo symmetric monomial curves with not Cohen–Macaulay tangent cones", Turkish J of Mathematics, 44, 2174-2184 (2020) PDF
2019
O. Safak, A. Atamturk, M.S. Akturk, "Accommodating new flights into an existing airline flight schedule", Transportation Research Part C: Emerging Technologies, 104, 265-286 (2019)
A.I. Mahmutogullari, S. Ahmed, O. Cavus, M.S. Akturk, "The Value of Multi-Stage Stochastic Programming in Risk-Averse Unit Commitment Under Uncertainty", IEEE Trans on Power Systems, 34, 3666-3667 (2019) PDF
C. Ararat, B. Rudloff, "Dual representations for systemic risk measures", Mathematics and Financial Economics, 14, 139-174 (2019) PDF
E. Ozbay, O. Cavus, B.Y. Kara, "Shelter site location under multi-hazard scenarios", Computers and Operations Research, 106, 102-118 (2019)
O. Ahipasaoglu, N. Erkip, O.E. Karasan, "The venue management problem: setting staffing levels, shifts and shift schedules at concession stands", J of Scheduling, 22, 69-83 (2019) PDF
H. Erkan, N. Erkip, O. Safak, "Collaborative decision making for air traffic management: A generic mathematical program for the rescheduling problem", Computers and Industrial Engineering, 137, 106016-1--15 (2019)
R. Kiaz, E. Berk, U. Gurler, "Minimal conic quadratic reformulations and an optimization model", Operations Research Letters, 47, 489-493 (2019)
N. Ghaffarinasab, B.Y. Kara, "Benders Decomposition Algorithms for Two Variants of the Single Allocation Hub Location Problem", Networks and Spatial Economics, 19, 83-108 (2019) PDF
O. Dukkanci, B.Y. Kara, T. Bektas, "The green location-routing problem", Computers and Operations Research, 105, 187-202 (2019)
O. Dukkanci, M. Peker, B.Y. Kara, "Green hub location problem", Transportation Research E, 125, 116-139 (2019)
O.B. Kinay, F. Saldana-da-Gama, B.Y. Kara, "On multi-criteria chance-constrained capacitated single-source discrete facility location problems", Omega - Int J of Management Science, 83, 107-122 (2019)
O. Karsu, B.Y. Kara, B. Selvi, "The refugee camp management: a general framework and a unifying decision-making model", J of Humanitarian Logistics and Supply Chain Management., 131-150 (2019) PDF
I. Kara, B.Y. Kara, "Comments on the 'polynomial formulation and heuristic-based approach for the k-travelling repairman problem", Int J of Mathematics in Operational Research..
S. Savaser, O.B. Kinay, B.Y. Kara, P. Cay, "Organ Transplantation Logistics: A Case for Turkey", OR Spectrum, 41, 327-356 (2019) PDF
T. Tanerguclu, O.E. Karasan, I. Akgun, E. Karasan, "Radio Communications Interdiction Problem under deterministic and probabilistic jamming", Computers and Operations Research, 107, 200-217 (2019)
O. Arslan, O.E. Karasan, R. Mahjoub, H. Yaman, "A Branch-and-Cut Algorithm for the Alternative Fuel Refueling Station Location Problem with Routing", Transportation Science, 53, 1107-1125 (2019) PDF
Y. Karpat, "Influence of diamond tool chamfer angle on surface integrity in ultra-precision turning of singe crystal silicon", Int J of Advanced Manufacturing Technology, 101, 1565-1572 (2019) PDF
S.N.B. Oliaei, Y. Karpat, "Modelling and analysis of tool deflections in tailored micro end mills", Int J of Mechatronics and Manufacturing Systems, 12, 20-37 (2019) PDF
O. Karsu, M. Azizoglu, "An exact algorithm for the minimum squared load assignment problem", Computers and Operations Research, 106, 76-90 (2019)
A.S. Kocaman, "Pompaj depolamalı hibrid enerji sistemi optimizasyonu -Türkiye icin vaka analizi", J of the Faculty of Engineering and Architecture of Gazi Un., 34, 53-68 (2019)
H.I. Bayrak, K. Kargar, M.C. Pinar, "Bilateral trade with risk‐averse intermediary using linear network optimization", Networks, 74, 325-332 (2019) PDF
C. Arbib, M.C. Pinar, M. Tonelli, "Competitive location and pricing on a line with metric transportation costs", European J of Operational Research, 282, 188-200 (2019)
M.C. Pinar, "Necessary and Sufficient Conditions for Noiseless Sparse Recovery via Convex Quadratic Splines", SIAM J on Matrix Analysis and Applications, 40, 194-209 (2019) PDF
M. Sahin, N. Sahin, "Betti Numbers for certain Cohen-Macaulay Tangent Cones", Bull. Austral. Math. Soc., 99, 68-77 (2019) PDF
I.R. Martin, J.J.S. Gonzalez, H. Yaman, "The Periodic Vehicle Routing Problem with Driver Consistency", European J of Operational Research, 273, 575-584 (2019)
2018
A.I. Mahmutogullari, O. Cavus, M.S. Akturk, "Bounds on risk-averse mixed-integer multi-stage stochastic problems with mean-CVAR", European J of Operational Research, 266, 595-608 (2018)
E. Koca, H. Yaman, M.S. Akturk, "Stochastic lot sizing problem with nervousness considerations", Computers and Operations Research, 94, 23-37 (2018)
O. Safak, O. Cavus, M.S. Akturk, "Multi-stage airline scheduling problem with stochastic passenger demand and non-cruise times", Transportation Research B, 114, 39-67 (2018)
K. Gokbayrak, "Robust gateway placement in wireless mesh networks", Computers and Operations Research, 97, 84-95 (2018)
M.A. Ulku, U. Gurler, "The impact of abusing return policies: A newsvendor model with opportunistic consumers", Int J of Production Economics, 203, 124-133 (2018)
B.E. Oruc, B.Y. Kara, "Post-disaster assessment routing problem", Transportation Research B, 116, 76-102 (2018)
N. Ghaffarinasab, A. Motallebzadeh, Y. Jabarzadeh, B.Y. Kara, "Efficient simulated annealing based solution approaches to the competitive single and multiple allocation hub location problems", Computers and Operations Research, 90, 173-192 (2018)
O.B. Kinay, B.Y. Kara, F. Saldana-da-Gama, I. Correia, "Modeling the shelter site location problem using chance constraints: A case study for Istanbul", European J of Operational Research, 270, 132-145 (2018)
G. Ozbaygin, O.E. Karasan, H. Yaman, "New exact solution approaches for the split delivery vehicle routing problem", Euro J on Computational Optimization, 6, 85-115 (2018) PDF
B. Yildiz, O.E. Karasan, H. Yaman, "Branch-and-price approaches for the network design problem with relays", Computers and Operations Research, 92, 155-169 (2018)
M. Ahmadi, Y. Karpat, O. Acar, Y.E. Kalay, "Microstructure effects on process outputs in micro scale milling o heat treated Ti6Al4V titanium alloys", J of Materials Processing Technology, 252, 333-347 (2018)
S.N.B. Oliaeli, Y. Karpat, "Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon", Precision Engineering, 51, 403-414 (2018)
Y. Karpat, M. Kanli, S.N.B. Olivaei, "Mikro frezeleme işleminin takım eksen sapması göz önüne alınarak mekanistik modellemesi", J of the Faculty of Engineering and Architecture of Gazi Un., 33, 771-781 (2018) PDF
S.N.B. Oliaei, Y. Karpat, P. Davim, A. Perveen, "Micro Tool Design and Fabrication: A Review", J of Manufacturing Processes, 36, 496-519 (2018) PDF
O. Altintas, B. Okten, O. Karsu, A.S. Kocaman, "Bi-objective optimization of a grid-connected decentralized energy system", Int J of Energy Research, 42, 447-465 (2018) PDF
O. Karsu, A. Morton, N. Argyris, "Capturing preferences for inequality aversion in decision support", European J of Operational Research, 264, 686-706 (2018)
N. Kaynar, O. Karsu, "Equitable decision making approaches over allocations of multiple benefits to multiple entities", Omega - Int J of Management Science, 81, 85-98 (2018)
G. Bolukbasi, A.S. Kocaman, "A prize collecting Steiner tree approach to least cost evaluation of grid and off-grid electrification systems", Energy, 160, 536-543 (2018)
M. Peker, A.S. Kocaman, B.Y. Kara, "A two-stage stochastic programming approach for reliability constrained power system expansion planning", Int J of Electrical Power and Energy Systems, 103, 458-469 (2018)
M. Peker, A.S. Kocaman, B.Y. Kara, "Benefits of transmission switching and energy storage in power systems with high renewable energy penetration", Applied Energy, 228, 1182-1197 (2018) PDF
O. Altintas, B. Okten, O. Karsu, A.S. Kocaman, "Bi-objective optimization of a grid-connected decentralized energy system", Int J of Energy Research, 42, 447-465 (2018) PDF
E. Nadar, A. Akcay, M. Akan, A. Scheller-Wolf, "The benefits of state aggregation with extreme-point weighting for assemble-to-order systems", Operations Research, 66, 1040-1057 (2018) PDF
H. Dilek, O. Karaer, E. Nadar, "Retail location competition under carbon penalty", European J of Operational Research, 269, 146-158 (2018)
M.C. Pinar, "Robust Trading Mechanisms over 0/1 Polytopes", J of Combinatorial Optimization, 36, 845-860 (2018) PDF
M.C. Pinar, "On explicit solutions of a two-echelon supply chain coordination game", Optimization Letters, 12, 661-673 (2018) PDF
A.B. Pac, M.C. Pinar, "On robust portfolio and naïve diversification: mixing ambiguous and unambiguous assets", Annals of Operational Research, 266, 223-253 (2018) PDF
C. Kocyigit, H.I. Bayrak, M.C. Pinar, "Robust auction design under multiple priors by linear and integer programming", Annals of Operational Research, 260, 233-253 (2018) PDF
K. Kargar, H.I. Bayrak, M.C. Pinar, "Robust bilateral trade with discrete types", Euro J on Computational Optimization, 6, 367-393 (2018) PDF
M.C. Pinar, "Worst-case large deviations upper bounds for i.i.d. sequences under ambiguity", Turkish J of Mathematics, 42, 257-271 (2018) PDF
M. Sahin, N. Sahin, "On pseudo symmetric monomial curves", Communications in Algebra, 46, 2561-2573 (2018) PDF
A. Sen, A. Atamturk, P. Kaminsky, "A conic integer optimization approach to constrained assortment optimization under the mixed multinomial logit model", Operations Research, 66, 994-1003 (2018) PDF
K. Guler, E. Korpeoglu, A. Sen, "Newsvendor competition under asymmetric cost information", European J of Operational Research, 271, 561-576 (2018)
F. Ulus, "Tractability of convex vector optimization problems in the sense of polyhedral approximations", J of Global Optimization, 72, 731-742 (2018) PDF
I. Diarrasouba, M. Mahjoub, A.R. Mahjoub, H. Yaman, "k-node-disjoint Hop-constrained Survivable Networks: Polyhedral Analysis and Branch and Cut", Annals of Telecommunications, 73, 5-28 (2018) PDF
L.A. Wolsey, H. Yaman, "Convex Hull Results for the Warehouse Problem", Discrete Optimiation, 30, 108-120 (2018)
V. Bayram, H. Yaman, "Shelter Location and Evacuation Route Assignment under Uncertainty: A Benders Decomposition Approach", Transportation Science, 52, 416-436 (2018) PDF
V. Bayram, H. Yaman, "A Stochastic Programming Approach for Shelter Location and Evacuation Planning", RAIRO Operations Research, 52, 779-805 (2018) PDF
2017
O. Safak, S. Gurel, M.S. Akturk, "Integrated aircraft-path assignment and robust schedule design with cruise speed control", Computers and Operations Research, 84, 127-145 (2017)
H. Gultekin, O.O. Dalgic, M.S. Akturk, "Pure cycles in two-machine dual-gripper robotic cells,” Robotics and Computer-Integrated Manufacturing", Robotics and Computer-Integrated Manufacturing, 48, 121-131 (2017) PDF
U. Arikan, S. Gurel, M.S. Akturk, "Flight network-based approach for integrated airline recovery with cruise time control", Transportation Science, 51, 1259-1287 (2017) PDF
C. Ararat, A.H. Hamel, B. Rudloff, "Set-Valued Shortfall and Divergence Risk Measures", Int J of Theoretical and Applied Finance, 48, 1750026(48) (2017) PDF
E.Z. Demirci, N. Erkip, "Designing an intervention strategy for public-interest goods: The California electric vehicle market case", Omega - Int J of Management Science, 69, 53-69 (2017)
K. Gokbayrak, A.S. Kocaman, "A distance-limited continuous location-allocation problem for spatial planning of decentralized systems", Computers and Operations Research, 88, 15-29 (2017)
K. Gokbayrak, E.A. Yildirim, "Exact and heuristic approaches based on noninterfering transmissions for joint gateway selection, time slot allocation, routing and power control for wireless mesh networks", Computers and Operations Research, 81, 102-118 (2017)
O. Dukkanci, B.Y. Kara, "Routing and scheduling decisions in the hierarchical hub location problem", Computers and Operations Research, 85, 45-57 (2017)
B. Yildiz, O.E. Karasan, "Regenerator location problem in flexible optical networks", Operations Research, 65, 595-620 (2017) PDF
S.N.B. Oliaeli, Y. Karpat, "Built-up edge effects on process outputs of titanium alloy micro milling", Precision Engineering, 49, 305-315 (2017)
E. Gozu, Y. Karpat, "Uncertainty analysis of force coefficients during micromilling of titanium alloy", Int J of Advanced Manufacturing Technology, 93, 839-855 (2017) PDF
S.N.B. Oliaei, Y. Karpat, "Investigating the influence of friction conditions on finite element simulation of microscale machining with the presence of built-up edge", Int J of Advanced Manufacturing Technology, 90, 819-829 (2017) PDF
S. Yuan, A.S. Kocaman, V. Modi, "Benefits of forecasting and energy storage in isolated grids with large wind penetration – The case of Sao Vicente", Renewable Energy, 105, 167-174 (2017)
A.S. Kocaman, V. Modi, "Value of pumped hydro storage in a hybrid energy generation and allocation system", Applied Energy, 205, 1202-1215 (2017) PDF
H.I. Bayrak, K. Guler, M.C. Pinar, "Optimal allocation with costly inspection and discrete types under ambiguity", Optimization Methods and Software, 32, 699-718 (2017) PDF
M.C. Pinar, C. Kizilkale, "Robust screening under ambiguity", Mathematical Programming, 163, 273-299 (2017) PDF
S. Biagini, M.C. Pinar, "The robust Merton problem of an ambiguity averse investor", Mathematics and Financial Economics, 11, 1-24 (2017) PDF
A. Sen, M. Talebian, "Markdown Budgets for Retail Buyers: Help or Hindrance?", Production and Operations Management, 26, 1875-1892 (2017) PDF
K. Guler, E.Korpeoglu, A. Sen, "Design and Analysis of Mechanisms for Decentralized Joint Replenishment", European J of Operational Research, 259, 992-1002 (2017)
A. Toptal, B. Cetinkaya, "How Supply Chain Coordination Affects the Environment: A Carbon Footprint Perspective", Annals of Operations Research, 250, 487-519 (2017) PDF
U. Koc, A. Toptal, I. Sabuncuoglu, "Coordination of Inbound and Outbound Transportation Schedules with the Production Schedule", Computers and Industrial Engineering, 103, 178-192 (2017)
B. Rudloff, F. Ulus, R. Vanderbei, "A parametric simplex algorithm for linear vector optimization problems", Mathematical Programming, 163, 213-242 (2017) PDF
G. Ozbaygin, O.E. Karasan, M. Savelsbergh, H. Yaman, "A branch-and-price algorithm for the vehicle routing problem with roaming delivery locations", Transportation Research B, 100, 115-137 (2017)
M. Merakli, H. Yaman, "A Capacitated Hub Location Problem under Hose Demand Uncertainty", Computers and Operations Research, 88, 58-70 (2017)
2016
U. Arikan, S. Gurel, M.S. Akturk, "Integrated aircraft and passenger recovery with cruise time controllability", Annals of Operational Research, 236, 295-317 (2016) PDF
H. Gurkan, S. Gurel, M.S. Akturk, "An integrated approach for airline scheduling, aircraft fleeting and routing with cruise speed control", Transportation Research Part C: Emerging Technologies, 68, 38-57 (2016)
H. Gultekin, A. Tula, M.S. Akturk, "Automated robotic assembly line design with unavailability periods and tool changes", European J of Industrial Engineering, 10, 499-526 (2016) PDF
E. Dogruoz, S. Dayanik, G. Budak, I. Sabuncuoglu, "Analysis of the vitro nanoparticle-cell interactions via a smoothing-splines mixed-effects model", Artificial Cells, Nanomedicine and Biotechnology, 44, 800-810 (2016) PDF
S. Dayanik, S.O. Sezer, "Sequential sensor installation for Wiener disorder detection", Mathematics of Operations Research, 41, 827-850 (2016) PDF
U. Gurler, D. Yenigun, M. Caglar, E. Berk, "On the Modeling of CO2 EUA and CER Prices of EU-ETS for the 2008-2012 Period", Applied Stochastic Models in Business and Industry, 32, 375-395 (2016) PDF
M. Peker, B.Y. Kara, J.F. Campbell, S. Alumur, "Spatial Analysis of Single Allocation Hub Location Problems", Networks and Spatial Economics, 16, 1075-1101 (2016) PDF
M.R. Taner, B.Y. Kara, "Endogenous Effects of Hubbing on Flow Intensities", Networks and Spatial Economics, 16, 1151-1181 (2016) PDF
B. Yazar, O. Arslan, O.E. Karasan, B.Y. Kara, "Fiber Optical Network Design Problems: A Case for Turkey", Omega - Int J of Management Science, 63, 23-40 (2016)
I. Mahmutogullari, B.Y. Kara, "Hub Location under Competition", European J of Operational Research, 250, 214-225 (2016)
O. Yilmaz, B.Y. Kara, U. Yetis, "Hazardous waste management system design under population and environmental impact considerations", J of Environmental Management..
B. Kepir, C. Koocyigit, I. Koyuncu, M.B. Ozer, B.Y. Kara, M.A. Gürbüz, "Flight-Scheduling Optimization and Automation for AnadoluJet", Interfaces, 46, 315-325 (2016) PDF
H. Sahin, B.Y. Kara, O.E. Karasan, "Debris Removal during disaster response: A Case for Turkey", Socio Economic Planning Sciences, 53, 49-59 (2016) PDF
N. Bektas, B.Y. Kara, O.E. Karasan, "Solution methodologies for debris removal in disaster response", Euro J on Computational Optimization, 4, 403-445 (2016) PDF
B. Yildiz, O. Arslan, O.E. Karasan, "A branch and price approach for routing and refueling station location", European J of Operational Research, 248, 815-826 (2016)
F. Bellini, O.E. Karasan, M.C. Pinar, "Joint mixability of some integer matrices", Discrete Optimization, 20, 90-104 (2016)
G. Ozbaygin, H. Yaman, O.E. Karasan, "Time constrained maximal covering salesman problem with weighted demands and partial coverage", Computers and Operations Research, 76, 226-237 (2016)
G.D. Batur, S. Erol, O.E. Karasan, "Robot move sequence determining and multiple part-type scheduling in hybrid flexible flow shop robotic cells", Computers and Industrial Engineering, 100, 72-87 (2016)
O. Arslan, O.E. Karasan, "A Benders decomposition approach for the charging station location problem with plug-in hybrid electric vehicles", Transportation Research B, 93, 670-695 (2016)
S.N.B. Oliaei, Y. Karpat, "Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V", J of Materials Processing Technology, 235, 28-40 (2016)
S. Oliaei, Y. Karpat, "Influence of Tool Wear on Machining Forces and Tool Deflections during Micro Milling", Int J of Advanced Manufacturing Technology, 84, 1963-1980 (2016) PDF
O. Karsu, "Approaches for inequity-averse sorting", Computers and Operations Research, 66, 67-80 (2016)
A.S. Kocaman, C. Abad, T.J. Troy, W.T. Huh, V. Modi, "A stochastic model for a macroscale hybrid renewable energy system", Renewable and Sustainable Energy Reviews, 54, 688-703 (2016)
E. Nadar, M. Akan, A. Scheller-Wolf, "Experimental Rssults Indicating Lattice-Dependent Policies May Be Optimal for General Assemble-To-Order Systems", Production and Operations Management, 25, 647-661 (2016) PDF
R.S. Burachik, C.Y. Kaya, M.C. Pinar, "Non-linear continuous optimization", Euro J on Computational Optimization, 4, 1-2 (2016) PDF
H.I. Bayrak, M.C. Pinar, "Generalized second price auction is optimal for discrete types", Economics Letters, 141, 35-38 (2016)
A. Sen, "Competitive Markdown Timing for Perishable and Sustitutable Products", Omega - Int J of Management Science, 64, 24-41 (2016)
G. Hancerliogulları, A. Sen, E. Agca, "Demand Uncertainty and Inventory Turnover Performance: An Empirical Analysis of the US Retail Industry", Int J of Physical Distribution & Logistics Managmenet, 46, 681-708 (2016) PDF
I. Rodríguez-Martín, J.J. Salazar-González, H. Yaman, "The ring/κ-rings network design problem: Model and branch-and-cut algorithm", Networks, 68, 130-140 (2016) PDF
L.A. Wolsey, H. Yaman, "Continuous Knapsack Sets with Divisible Capacities", Mathematical Programming, 156, 1-20 (2016) PDF
I. Rodríguez-Martín, J.J. Salazar-González, H. Yaman, "Hierarchical Survivable Network Design Problems", Electronic Notes in Discrete Mathematics, 52, 229-236 (2016)
I.R. Martin, J.J.S. Gonzalez, H. Yaman, "A Branch-and-cut Algorithm for Two-Level Survivable Network Design Problems", Computers and Operations Research, 67, 102-112 (2016)
M. Merakli, H. Yaman, "Robust intermodal hub location under polyhedral demand uncertainty", Transportation Research B, 86, 66-85 (2016)
2015
A.S. Duran, S. Gurel, M.S. Akturk, "Robust airline scheduling with controllable cruise times and chance constraints", IIE Transactions, 47, 1-20 (2015) PDF
Z. Atan, N. Erkip, "Note on "The Backroom Effect in Retail Operations"", Production and Operations Management, 24, 1833-1834 (2015) PDF
I. Mahmutogullari, B.Y. Kara, "Hub Location Problem with Allowed Routing between non-hub nodes", Geographical Analysis, 47, 410-430 (2015) PDF
F. Kilici, B.Y. Kara, B. Bozkaya, "Locating temporary shelter areas after an Earthquake: Case for Turkey", European J of Operational Research, 243, 323-332 (2015)
F. Sahinyazan, B.Y. Kara, M.R. Taner, "Selective Vehicle Routing for a Mobile Blood Donation System", European J of Operational Research, 246, 22-34 (2015)
M. Peker, B.Y. Kara, "The P-Hub maximal covering problem and extensions for gradual decay functions", Omega - Int J of Management Science, 54, 158-172 (2015)
B. Yildiz, O.E. Karasan, "Regenerator Location Problem and survivable extensions: A hub covering location perspective", Transportation Research B, 71, 32-55 (2015)
O. Arslan, B. Yildiz, O.E. Karasan, "Minimum cost path problem for Plug-in Hybrid Electric Vehicles", Transportation Research E, 80, 123-141 (2015)
S. Zeinali, B. Cetin, S.N.B. Oliaei, Y. Karpat, "Fabrication of microfluidics device with 3D electrode structures for high throughput DEP applications using high precision machining", Electrophoresis, 36, 1431-1442 (2015) PDF
O. Karsu, A. Morton, "Inequity averse optimization in operational research", European J of Operational Research, 245, 343-359 (2015)
A. Toptal, S. Cetinkaya, "The Impact of Price Skimming on Supply and Exit Decisions", Applied Stochastic Models in Business and Industry, 31, 551-574 (2015) PDF
E. Koca, H. Yaman, M.S. Akturk, "Stochastic Lot Sizing Problem with Controllable Processing Times", Omega - Int J of Management Science, 53, 1-10 (2015)
V. Bayram, B.C. Tansel, H. Yaman, "Compromising system and user interests in shelter location and evacuation planning", Transportation Research B, 72, 146-163 (2015)
2014
M.S. Akturk, A. Atamturk, S. Gurel, "Aircraft rescheduling with cruise speed control", Operations Research, 62, 829-845 (2014) PDF
E. Koca, H. Yaman, M.S. Akturk, "Lot Sizing with Piecewise Concave Production Costs", Informs Journal of Computing, 26, 767-779 (2014) PDF
O. Cavus, A. Ruszczynski, "Computational Methods for Risk-Averse Undiscounted Transient Markov Models", Operations Research, 62, 401-417 (2014) PDF
O. Cavus, A. Ruszczynski, "Risk-Averse Control of Undiscounted Transient Markov Models", SIAM J on Control and Optimization, 52, 3935-3966 (2014) PDF
N. Cenk, G. Budak, S. Dayanik, I. Sabuncuoglu, "Artificial Neural Network Modeling and Simulation of In-Vitro Nanoparticles-Cell Interactions", J of Computational and Theoretical Nanoscience, 11, 272-282 (2014)
O.O. Ozener, R. Gullu, N. Erkip, "Near-Optimal Modified Base Stock Policies for the Capacitated Inventory Problem with Stochastic Demand and Fixed Cost", Asia Pacific J of Operational Research, 31, 1450019-1--27 (2014)
N.C. Buyukkaramikli, U. Gurler, O. Alp, "Coordinated Logistics: Replenishment with Capacitated Transportation for a Supply Chain", Production and Operations Management, 23, 110-126 (2014) PDF
U. Gurler, O. Alp, N.C. Buyukkramikli, "Coordinated inventory replenishment and outsourced transportation operatoins", Transportation Research E, 70, 400-415 (2014)
R. Kian, U. Gurler, E. Berk, "The dynamic lot-sizing problem with convex economic production costs and setups", Int J of Production Economics, 155, 361-379 (2014)
O. Arslan, B. Yildiz, O.E. Karasan, "Impacts of battery characteristics, driver preferences and road network features on travel costs of a plug-in hybrid electric vehicle (PEHV) for long-distance trips", Energy Policy, 74, 168-178 (2014)
O.E. Karasan, A.R. Mahjoub, O. Ozkok, H. Yaman, "Survivability in Hierarchical Telecommunications Networks under Dual Homing", Informs Journal of Computing, 26, 1-15 (2014) PDF
Y. Karpat, B. Deger, O. Bahtiyar, B. Kaftanoglu, "A Mechanistic Approach to Investigate Drilling of UD-CFRP Laminates with PCD Drills", CIRP Annals - Manufacturing Technology, 63, 81-84 (2014)
Y. Karpat, B. Deger, O. Bahtiyar, "Experimental Evaluation of Polycrystalline Diamond Tool Geometries while Drilling Carbon Fiber Reinforced Plastics", Int J of Advanced Manufacturing Technology, 71, 1295-1307 (2014) PDF
O. Karsu, M. Azizoglu, "Bi-criteria multi-resource generalized assignment problem", Naval Research Logistics, 61, 621-638 (2014) PDF
E. Nadar, M. Akan, A. Scheller-Wolf, "Optimal Structural Results for Assemble-to-Order Generalized M-Systmes", Operations Research, 62, 571-579 (2014) PDF
M.C. Pinar, "Sur l'allocation dynamique de portefeuille robuste contre l'incertitude des rendements moyens", INFOR, 52, 14-19 (2014)
M.C. Pinar, "Equilibrium in an Ambiquity-Averse Mean-Variance Investors Market", European J of Operational Research, 237, 957-965 (2014)
M.C. Pinar, "Lower hedging of American contingent claims with minimal surplus risk in finite-state financial markets by mixed-integer linear programming", Discrete Applied Mathematics, 164, 304-312 (2014)
M.C. Pinar, A.B. Pac, "Mean semi-deviation from a target and robust portfolio choice under distribution and mean return ambiquity", J of Computational and Applied Mathematics, 259, 394-405 (2014)
A. Fabretti, S. Herzel, M.C. Pinar, "Delegated Portfolio Management under Ambiquity Aversion", Operations Research Letters, 42, 190-195 (2014)
Y.E. Arisoy, A. Altay-Salih, M.C. Pinar, "Optimal multi-period consumption and investment with short-sale constraints", Finance Research Letters, 11, 16-24 (2014)
A.B. Pac, M.C. Pinar, "Robust Portfolio Choice with CVaR and VaR under Distribution and Mean Return Ambiquity", Top, 22, 875-891 (2014) PDF
F. Arslan, N. Sahin, "A fast algorithm for constructing Arf closure and a conjecture", J of Algebra, 417, 148-160 (2014)
A. Toptal, H. Ozlu, D. Konur, "Joint Decisions on Inventory Replenishment and Emission Reduction Investment under Different Emission Regulations", Int J of Production Research, 52, 243-269 (2014) PDF
A. Toptal, U. Koc, I. Sabuncuoglu, "A Joint Production and Transportation Planning Problem with Heterogeneous Vehicles", J of Operational Research Society, 65, 180-196 (2014) PDF
M.V. Vyve, L.A. Wolsey, H. Yaman, "Relaxations for two-level multi-item lot-sizing problems", Mathematical Programming, 146, 495-523 (2014) PDF
I.R. Martin, J.J.S. Gonzalez, H. Yaman, "A Branch-and-cut Algorithm for the Hub Location and Routing Problem", Computers and Operations Research, 50, 161-174 (2014)
A. Sen, H. Yaman, K. Guler, E. Korpeoglu, "Multi-period supplier selection under price uncertainty", J of Operational Research Society, 65, 1636-1648 (2014) PDF
E.D. Gunes, H. Yaman, B. Cekyay, V. Verter, "Matching patient and physician preferences in designing a primary care facility network", J of Operational Research Society, 65, 483-496 (2014) PDF
2013
Z. Uruk, H. Gultekin, M.S. Akturk, "Two-machine flowshop scheduling with flexible operations and controllable processing times", Computers and Operations Research, 40, 639-653 (2013)
E.F. Morgul, O. Cavus, K. Ozbay, C. Iyigun, "Modeling of Bus Transit Driver Availability for Effective Emergency Evacuation in Disaster Relief", Transportation Research Record, 2376, 45-55 (2013) PDF
S. Dayanik, M. Parlar, "Dynamic bidding strategies in search-based advertising", Annals of Operational Research, 211, 103-136 (2013) PDF
S. Dayanik, W.B. Powell, K. Yamazaki, "Asymptotically optimal Bayesian sequential change detection and identification rules", Annals of Operational Research, 208, 337-370 (2013) PDF
S. Dayanik, A.J. Yu, "Reward-Rate Maximization in Sequential-Identification Under a Stochastic Deadline", SIAM J on Control and Optimization, 51, 2922-2948 (2013) PDF
K. Gokbayrak, E.A. Yildirim, "Joint gateway selection, transmission slot assignment, routing and power control for wireless mesh networks", Computers and Operations Research, 40, 1671-1679 (2013)
O. Arslan, O.E. Karasan, "Cost and emission impacts of virtual power plant formation in plug-in hybrid electric vehicle penetrated networks", Energy, 60, 116-124 (2013)
Y. Karpat, N. Polat, "Mechanists force modeling for miling of carbon fiber reinforced polymers with double helix tools", CIRP Annals - Manufacturing Technology, 62, 95-98 (2013)
M.C. Pinar, "Buyer's quantile hedge portfolios in discrete-time trading", Quantitative Finance, 13, 729-738 (2013) PDF
M.C. Pinar, "Static and dynamic VaR constrained portfolios with application to delegated portfolio management", Optimization, 62, 1419-1432 (2013) PDF
F. Antonelli, C. Mancini, M.C. Pinar, "Calibrated American option pricing by stochastic linear programming", Optimization, 62, 1433-1450 (2013) PDF
M.C. Pinar, "Mixed-Integer Second-Order Cone Programming for Lower Hedging of American Contingent Claims in Incomplete Markets", Optimization Letters, 7, 63-78 (2013) PDF
R.J. Vanderbei, M.C. Pinar, E.B. Bozkaya, "Discrete-Time Pricing and Optimal Exercise of American Perpetual Warrants in the Geometric Random Walk Model", Applied Mathematics and Optimization, 67, 97-122 (2013) PDF
S. Biagini, M.C. Pinar, "The Best Gain-Loss Ratio is a Poor Performance Measure", SIAM J on Financial Mathematics, 4, 228-242 (2013) PDF
A. Sen, "A comparison of fixed and dynamic pricing policies in revenue management", Omega - Int J of Management Science, 41, 586-597 (2013)
A. Sen, "Performance bounds on optimal fixed prices", Operations Research Letters, 41, 530-534 (2013)
E. Korpeoglu, A. Sen, K. Guler, "Non-cooperative joint replenishment under asymmetric information", European J of Operational Research, 227, 434-443 (2013)
H. Calik, B.C. Tansel, "Double bound method for solving the p-center location problem", Computers and Operations Research, 40, 2991-2999 (2013)
U. Koc, A. Toptal, I. Sabuncuoglu, "A class of joint production and transportation planning problems under different delivery policies", Operations Research Letters, 41, 54-60 (2013)
H. Yaman, "The splittable flow arc set with capacity and minimum load constraints", Operations Research Letters, 41, 556-558 (2013)
2012
S. Yildiz, O. Karasan, M.S. Akturk, "An analysis of cyclic scheduling problems in robot centered cells", Computers and Operations Research, 39, 1290-1299 (2012)
G.D. Batur, O.E. Karasan, M.S. Akturk, "Multiple part-type scheduling in flexible robotic cells", Int J of Production Economics, 135, 726-740 (2012)
S. Dayanik, S.O. Sezer, "Multisource Bayesian sequential binary hypothesis testing problem", Annals of Operational Research, 201, 99-130 (2012) PDF
S. Dayanik, M. Egami, "Optimal Stopping Problems for Asset Management", J of Applied Probability, 44, 655-677 (2012)
U. Ozen, N. Erkip, M. Slikker, "Stability and Monotonicity in Newsvendor Situations", European J of Operational Research, 218, 416-425 (2012)
H. Yaman, o.E. Karasan, B.Y. Kara, "Release Time Scheduling and Hub Location for Next-Day Delivery", Operations Research, 60, 906-917 (2012) PDF
H. Toyoglu, O.E. Karasan, B.Y. Kara, "A New Formulation Approach for Location Routing Problems", Networks and Spatial Economics, 12, 635-659 (2012) PDF
S.A. Alumur, B.Y. Kara, O.E. Karasan, "Multimodal hub location and hub network design", Omega - Int J of Management Science, 40, 927-939 (2012)
S.A. Alumur, H. Yaman, B.Y. Kara, "Hierarchical multimodal hub location problem with time-definite deliveries", Transportation Research E, 48, 1107-1120 (2012)
Y. Karpat, B. Deger, O. Bahtiyar, "Drilling Thick Fabric Woven CFRP Laminates with Double Point Angle Tools", J of Materials Processing Technology, 212, 2117-2127 (2012)
Y. Karpat, O. Bahtiyar, B. Deger, "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer Laminates", Int J of Machine Tools and Manufactuıre, 56, 79-93 (2012)
M. Pinar, "A dual representation of gain-loss hedging for European claims in discrete time", Optimization, 61, 361-372 (2012) PDF
M.C. Pinar, A. Camci, "An Integer Programming Model for Pricing American Contingent Claims under Transaction Costs", Computational Economics, 39, 1-12 (2012) PDF
S. Goren, I. Sabuncuoglu, U. Koc, "Optimization of Schedule Stability and Efficiency Under Processing Time Variability and Random Machine Breakdowns in a Job Shop Environment", Naval Research Logistics, 59, 26-38 (2012)
K.D. Aral, H.A. Guvenir, I. Sabuncuoglu, A.R. Akar, "A Prescription Fraud Detection Model", Computer Methods and Programs in Biomedicine, 106, 37-46 (2012)
E. Korpeoglu, A. Sen, K. Guler, "A private contributions game for joint replenishment", Mathematical Methods of Operations Research, 75, 67-82 (2012)
M.R. Taner, O.E. Karasan, E. Yavuzturk, "Scheduling beams with different priorities on a military surveillance radar", IEEE Trans on Aerospace and Electronic Systems, 48, 1725-1739 (2012)
G. Erdogan, B. Tansel, I. Akgun, "Modelling and Solving and m-Location, n-Courier, Priority-based Planning Problem on a Network", J of Operational Research Society, 63, 2-15 (2012)
A. Toptal, "Integration of Shipment Scheduling Decisions for Forward and Reverse Channels in a Recoverable Item System", Int J of Production Economics, 140, 129-137 (2012)
D. Konur, A. Toptal, "Analysis and applications of replenishment problems under stepwise transportation costs and generalized wholesale prices", Int J of Production Economics, 140, 521-529 (2012)
P. Fouilhoux, O.E. Karasan, A.R. Mahjoub, O. Ozkok, H. Yaman, "Survivability in Hierarchical Telecommunications Networks", Networks, 59, 37-58 (2012)
B. Ayar, H. Yaman, "An Intermodal Multicommodity Routing Problem with Scheduled Services", Computational Optimization and Applications, 53, 131-153 (2012)
M. Zhang, S. Kucukyavuz, H. Yaman, "A polyhedral study of multiechelon Lot Sizing with Intermediate Demands", Operations Research, 60, 918-935 (2012) PDF
H. Yaman, S. Elloumi, "Star p-hub center problem and star p-hub median problem with bounded path lengths", Computers and Operations Research, 39, 2725-2732 (2012)
E.A. Yildirim, "On the accuracy of uniform polyhedral approximations of the copositive cone", Optimization Methods and Software, 27, 155-173 (2012)
E. Koca, E.A. Yildirim, "A hierarchical solution approach for a multicommodity distribution problem under a special cost structure", Computers and Operations Research, 39, 2612-2624 (2012)
2011
M.S. Akturk, "Joint cell loading and scheduling approach to cellular manufacturing systems", Int J of Production Research, 49, 6321-6341 (2011) PDF
M.S. Akturk, T. Ilhan, "Single CNC machine scheduling with controllable processing times to minimize total weighted tardiness", Computers and Operations Research, 38, 771-781 (2011)
E. Korpeoglu, H. Yaman, M.S. Akturk, "A multi-stage stochastic programming approach in master production scheduling", European J of Operational Research, 213, 166-179 (2011)
N.O. Bakir, "A Stackelberg game model for resource allocation in cargo container security", Annals of Operational Research, 187, 5-22 (2011) PDF
N.O. Bakir, G.A. Klutke, "Information and Preference Reversals in Lotteries", European J of Operational Research, 210, 752-756 (2011)
B. Biller, C.G. Corlu, "Accounting for Parameter Uncertainty in Large-Scale Stochastic Simulations with Correlated Inputs", Operations Research, 59, 661-673 (2011) PDF
I.S. Bakal, N. Erkip, R. Gullu, "Value of supplier's capacity information in a two-echelon supply chain", Annals of Operational Research, 191, 115-135 (2011) PDF
K. Gokbayrak, "State-dependent Control of a Single Stage Hybrid System with Poisson Arrivals", Discrete Event Dynamic Systems, 21, 577-592 (2011) PDF
K. Gokbayrak, "Receding Horizon Control of Mixed Line Flow Shop Systems", Discrete Event Dynamic Systems, 21, 1-10 (2011) PDF
B. Balcioglu, U. Gurler, "On the Use of Phase-Type Distributions for Inventory Management with Supply Disruptions", Applied Stochastic Models in Business and Industry.. PDF
U. Gurler, P. Kvam, "Adjusted Hazard Rate Estimator Based on a Known Censoring Probability", Communications in Statistics: Theory and Methods, 40, 4409-4416 (2011) PDF
U. Gurler, C.D. Yenigun, "Models and Comparisons for Hazard Change-Point Problem with Truncated and Censored Data", Computational Statistics and Data Analysis, 55, 2856-2870 (2011)
U. Gurler, D. Yenigun, "Full and conditional likelihood approaches for hazard change-point estimation with truncated and censored data", Computational Statistics and Data Analysis, 55, 2856-2870 (2011)
Y. Saleh, U. Gurler, E. Berk, "Centralized and decentralized management of groundwater with multiple users", European J of Operational Research, 215, 244-256 (2011)
H. Toyoglu, O.E. Karasan, B.Y. Kara, "Distribution Network Design on the Battlefield", Naval Research Logistics, 58, 188-209 (2011) PDF
S. Yildiz, M.S. Akturk, O.E. Karasan, "Bicriteria robotic cell scheduling with controllable processing times", Int J of Production Research, 49, 569-583 (2011)
O.E. Karasan, "Incremental polynomial time dualization of quadratic functions and a subclass of degree-k functions", Annals of Operations Research, 188, 251-261 (2011) PDF
Y. Karpat, "Temperature Dependent Flow Softening of Titanium Alloy Ti6Al4V: An Investigation Using Finite Element Simulation of Machining", J of Materials Processing Technology, 211, 737-749 (2011)
M.C. Pinar, "Gain-Loss Based Convex Risk Limits in Discrete-Time Trading", Computational Management Science, 8, 299-321 (2011) PDF
N. Khilwani, M. Tiwari, I. Sabuncuoglu, "Hybrid Petri-nets for Modeling and Performance Evaluation of Supply Chains", Int J of Production Research, 49, 4627-4656 (2011) PDF
I. Sabuncuoglu, G. Virlan, "Modeling and Analyzing Army Air assault Operations via Simulation", Simulation, 87, 1002-1014 (2011)
G. Erdogan, B. Tansel, "Two classes of Quadratic Assignment Problems that are Solvable as Linear Assignment Problems", Discrete Optimization, 8, 446-451 (2011)
I. Akgun, B. Tansel, "New Formulationsof the Hop-Constrained Minimum Spanning Tree Problem via Miller-Tucker-Zemlin Constraints", European J of Operational Research, 212, 263-276 (2011)
I. Akgun, B. Tansel, R.K. Wood, "The Multi-terminal Maximum-Flow Network-Interdiction Problem", European J of Operational Research, 211, 241-251 (2011)
A. Toptal, S.O. Bingol, "Transportation Pricing of a Truckload Carrier", European J of Operational Research, 214, 559-567 (2011)
H. Yaman, "Allocation Strategies in Hub Networks", European J of Operational Research, 211, 442-451 (2011)
Y. Cinar, H. Yaman, "The Vendor Location Problem", Computers and Operations Research, 38, 1678-1695 (2011)
A. Altin, H. Yaman, M.C. Pinar, "The Robust Network Loading Problem under Hose Demand Uncertainty: Formulation, Polyhedral Analysis, and Computations", Informs Journal of Computing, 23, 75-89 (2011) PDF
P. Kumar, E.A. Yildirim, "A linearly convergent linear-time first-order algorithm for support vector classification with a core set result", Informs Journal of Computing, 23, 377-391 (2011)
2010
M.S. Akturk, A. Atamturk, S. Gurel, "Parallel machine match-up scheduling with manufacturing cost considerations", J of Scheduling, 13, 95-110 (2010)
S. Gurel, E. Korpeoglu, M.S. Akturk, "An anticipative scheduling approach with controllable processing times", Computers and Operations Research, 37, 1002-1013 (2010)
A. Turkcan, M.S. Akturk, R.H. Storer, "Predictive/reactive scheduling with controllable processing times and earliness-tardiness penalties", IIE Transactions, 41, 1080-1095 (2010)
N.O. Bakir, A.A. Savachkin, A. Uribe, "Two countermeasure strategies to mitigate random disruptions in capacitated systems", J of Systems Science and Systems Engineering, 19, 210-226 (2010)
S. Dayanik, "Wiener disorder problem with observations at fixed discrete time epochs", Mathematics of Operations Research, 35, 756-785 (2010)
S. Dayanik, "Compound Poisson disorder problems with nonlinear detection delay penalty cost functions", Sequential Anlaysis, 29, 193-216 (2010)
E.S. Gel, N. Erkip, A. Thulaseedas, "Analysis of simple inventory control systems with execution errors: Economic impact under correction opportunities", Int J of Production Economics, 125, 153-166 (2010)
S. Savasaneril, N. Erkip, "An Analysis of Manufacturer Benefits under Vendor Managed Systems", IIE Transactions, 42, 455-477 (2010)
Z. Jemai, N. Erkip, Y. Dallery, "Contracting under uncertain capacity: A Generalization", Int J of Inventory Research, 1, 125-149 (2010)
M.M. Fadiloglu, O. Bulut, "A dynamic rationing policy for continuous-review inventory systems", European J of Operational Research, 202, 675-685 (2010)
K. Gokbayrak, O. Selvi, "A Search Method for Optimal Control of a Flow Shop Systems", European J of Operational Research, 205, 325-331 (2010)
K. Gokbayrak, O. Selvi, "Service Time Optimization of Mixed Line Flow Shop Systems", IEEE Trans on Automatic Control, 55, 395-404 (2010) PDF
U. Gurler, A. Yilmaz, "Inventory and coordination issues with two substitutable products", Applied Mathematical Modelling, 34, 539-551 (2010)
M.M. Fadiloglu, O.E. Karasan, M.C. Pinar, "A Model and Case Study for Efficient Shelf Usage and Assortment Analysis", Annals of Operations Research, 180, 105-124 (2010)
H. Gultekin, M.S. Akturk, O.E. Karasan, "Bicriteria robotic operation allocation in a flexible manufacturing cell", Computers and Operations Research, 37, 779-789 (2010)
Y. Karpat, "A Modified Material Model for the Finite Element Simulation of Machining Titanium Alloy Ti6Al4V", Machining Science and Technology, 14, 390-410 (2010)
O. Oguz, "Cutting Plane Algorithms for 0-1 Programming Based on Cardinality Cuts", European J of Operational Research, 205, 279-279 (2010)
A. Altin, P. Belotti, M.C. Pinar, "OSPF routing with optimal oblivious performance ratio under polyhedral demand uncertainty", Optimization and Engineering, 11, 395-422 (2010)
M.C. Pinar, A. Salih, A. Camci, "Expected gain-loss pricing and hedging of contingent claims in incomplete markets by linear programming", European J of Operational Research, 201, 770-785 (2010)
M.C. Pinar, "Gain-Loss Pricing under Ambiquity of Measure", ESAIM Control, Optimization and Calculus of Variations, 16, 132-147 (2010)
M. Pilanci, O. Arikan, M.C. Pinar, "Structured Least Squares Problems and Robust Estimators", IEEE Trans on Signal Processing, 58, 2453-2465 (2010) PDF
G. Metan, I. Sabuncuoglu, H. Pierreval, "Real time selection of scheduling rules and knowledge extraction via dynamically controlled data mining", Int J of Production Research, 48, 6909-6938 (2010)
S. Goren, I. Sabuncuoglu, "Optimization of Schedule Robustness and Stability under Random Machine Breakdowns and Processing Time Variability", IIE Transactions, 42, 203-220 (2010)
M.M. Tanrikulu, A. Sen, O. Alp, "A joint replenishment policy with individual control and constant size orders", Int J of Production Research, 48, 4253-4271 (2010)
A. Sen, D. Bhatia, K. Dogan, "Applied Materials Uses Operations Research to Design Its Service and Parts Network", Interfaces, 40, 253-266 (2010)
I. Akgun, B. Tansel, "Min-degree constrained minimum spanning tree problem: New formulation via Miller-Tucker-Zemlin constraints", Computers and Operations Research, 37, 72-82 (2010)
A. Toptal, I. Sabuncuoglu, "Distributed scheduling: a review of concepts and applications", Int J of Production Research, 48, 5235-5262 (2010)
F.S. Erenay, I. Sabuncuoglu, A. Toptal, M.K. Tiwari, "New solution methods for single machine bicriteria scheduling problem: Minimization of average flowtime and number of tardy jobs", European J of Operational Research, 201, 89-98 (2010)
E.D. Gunes, H. Yaman, "Health Network Mergers and Hospital Re-Planning", J of Operational Research Society, 61, 275-283 (2010)
E.A. Yildirim, "A simpler characterization of a spectral lower bound on the clique number", Mathematical Methods of Operations Research, 71, 267-281 (2010)
2009
M.S. Akturk, A. Atamturk, S. Gurel, "A strong conic quadratic reformulation for machine-job assignment with controllable processing times", Operations Research Letters, 37, 187-191 (2009)
M.F. Pac, O. Alp, T. Tan, "Integrated Workforce Capacity and Inventory Management Under Labor Supply Uncertainty", Int J of Production Research, 47, 4281-4304 (2009)
G. Mincsovicz, T. Tan, O. Alp, "Integrated Capacity and Inventory Management with Capacity Acquisition Lead Times", European J of Operational Research, 196, 949-958 (2009)
T. Tan, O. Alp, "An Integrated Approach to Inventory and Flexible Capacity Management subject to Fixed Costs and Non-stationary Stochastic Demand", OR Spectrum, 31, 337-360 (2009)
T. Tan, R. Gullu, N. Erkip, "Using imperfect advance demand information in ordering and rationing decisions", Int J of Production Economics, 121, 665-677 (2009)
K. Gokbayrak, O. Selvi, "A Subgradient Descent Algorithm for Optimization of Initially Controllable Flow Shop Systems", Discrete Event Dynamic Systems, 19, 267-282 (2009)
E. Berk, U. Gurler, G. Yildirim, "On pricing of perishable assets with menu costs", Int J of Production Economics, 121, 678-699 (2009)
U. Gurler, S. Oztop, A. Sen, "Optimal Bundle Formation and Pricing of Two Products with Limited Stock", Int J of Production Economics, 118, 442-462 (2009)
S. Alumur, B. Kara, O.E. Karasan, "The design of single allocation incomplete hub networks", Transportation Research B, 43, 936-951 (2009)
S. Alumur, B.Y. Kara, "A hub covering network design problem for cargo applications in Turkey", J of Operational Research Society, 60, 1349-1359 (2009)
H. Calik, S. Alumur, B.Y. Kara, O.E. Karasan, "A Tabu-search Based Heuristic for the Hub Covering Problem over Incomplete Hub Netwroks", Computers and Operations Research, 36, 3088-3096 (2009)
H. Gultekin, O.E. Karasan, M.S. Akturk, "Pure Cycles in Flexible Robotic Cells", Computers and Operations Research, 36, 329-343 (2009)
Y. Karpat, "Investigation of the effect of cutting tool edge radius on material separation due to ductile fracture in machining", Int J of Mechanical Sciences, 51, 541-546 (2009)
M.C. Pinar, "Measures of Model Uncertainty and Calibrated Option Bounds", Optimization, 58, 335-350 (2009)
A. Camci, M.C. Pinar, "Pricing American contingent claims by stochastic linear programming", Optimization, 58, 627-640 (2009)
R.J. Vanderbei, M.C. Pinar, "Pricing American Perpetual Warrants by Linear Programming", SIAM Review, 51, 767-782 (2009)
I. Sabuncuoglu, S. Goren, "Hedging Production Schedules Against Uncertainty in Manufacturing Environment with a Review of Robustness and Stability Research", Int J of Computer Integrated Manufacturing, 22, 138-157 (2009)
I. Sabuncuoglu, E. Erel, A. Alp, "Ant colony optimization for the single model U-type assembly line balancing problem", Int J of Production Economics, 120, 287-300 (2009)
A. Koc, I. Sabuncuoglu, E. Erel, "Two Exact Formulations for Dissembly Line Balancing Problem and Task Precedence Diagram Construction using AND/OR Graph", IIE Transactions, 41, 866-881 (2009)
A. Sen, A.X. Zhang, "Style goods pricing with demand learning", European J of Operational Research, 196, 1058-1075 (2009)
Z. Bulut, U. Gurler, A. Sen, "Bundle pricing of inventories with stochastic demand", European J of Operational Research, 197, 897-911 (2009)
G. Samatli-Pac, M.R. Taner, "The role of Repair Strategy in Warranty Cost Minimization: An Investigation via Quasi-renewal Processes", European J of Operational Research, 197, 632-641 (2009)
U.Z. Yildirim, B.C. Tansel, I. Sabuncuoglu, "A Multi-modal Discrete Event Simulation Model for Military Deployment", Simulation Modeling Practice and Theory, 17, 597-611 (2009)
A. Toptal, "Replenishment decisions under an all-units discount schedule and stepwise freight costs", European J of Operational Research, 198, 504-510 (2009)
H. Yaman, "The hierarchical hub median problem with single assignment", Transportation Research B, 43, 643-658 (2009)
H. Yaman, "Polyhedral analysis for the two-item uncapacitated lot-sizing problem with one-way substitution", Discrete Applied Mathematics, 157, 3133-3151 (2009)
P. Fouilhoux, M. Labbe, A.R. Mahjoub, H. Yaman, "Generating facets for the independence system polytope", SIAM J on Discrete Mathematics, 23, 1484-1506 (2009)
P. Kumar, E.A. Yildirim, "An Algorithm and a Core Set Result for the Weighted Euclidean One-Center Problem", Informs Journal of Computing, 21, 614-629 (2009)
2008
M.O. Atan, M.S. Akturk, "Single CNC machine scheduling with controllable processing times and multiple due dates", Int J of Production Research, 46, 6087-6111 (2008)
S. Gurel, M.S. Akturk, "Scheduling preventive maintenance on a single CNC machine", Int J of Production Research, 46, 6797-6821 (2008)
O. Alp, T. Tan, "Tactical Capacity Management under Capacity Flexibility", IIE Transactions, 40, 221-237 (2008)
I. Sabuncuoglu, M.M. Fadiloglu, S. Celik, "Variance Reduction Techniques: Experimental Comparison and Analysis for Single Systems", IIE Transactions, 40, 538-551 (2008)
M.M. Fadiloglu, E. Berk, M.C. Gurbuz, "Supplier diversification under binomial yield", Operations Research Letters, 36, 539-542 (2008)
E. Erkut, A. Ingolfsson, G. Erdogan, "Ambulance location for maximum survival", Naval Research Logistics, 55, 42-58 (2008)
K. Gokbayrak, O. Selvi, "Optimization of a Flow Shop System of Initially Controllable Machines", IEEE Trans on Automatic Control, 53, 2665-2668 (2008) PDF
E. Berk, U. Gurler, "Analysis of the (Q,r) Inventory Model for Pershables with Positive Lead Times and Lost Sales", Operations Research, 56, 1238-1246 (2008) PDF
C. Pince, U. Gurler, E. Berk, "A Continuous Review Replenishment-Disposal Policy for an Inventory System with autonomous supply and fixed disposal costs", European J of Operational Research, 190, 421-442 (2008)
U. Gurler, B.Y. Ozkaya, "Analysis of the (s,S) policy for perishables with a random shelf life", IIE Transactions, 40, 759-781 (2008)
S. Alumur, B. Kara, "Network hub locations problems: the state of the art", European J of Operational Research, 190, 1-21 (2008)
V. Verter, B. Kara, "A Path Based Approach for Hazmat Transport Network Design", Management Science, 54, 29-40 (2008)
H. Gultekin, M.S. Akturk, O.E. Karasan, "Scheduling in Robotic Cells: Process Flexibility and Cell Layout", Int J of Production Research, 46, 2105-2121 (2008)
H. Gultekin, M.S. Akturk, O.E. Karasan, "Bicriteria Robotic Cell Scheduling", J of Scheduling, 11, 457-473 (2008)
T. Ozel, Y. Karpat, A. Srivastava, "Hard turning with variable micro-geometry PcBN tools", CIRP Annals - Manufacturing Technology, 57, 73-76 (2008)
Y. Karpat, T. Ozel, "Process simulations for 3D turning using uniform and variable microgeometry PCBN tools", Int J of Machining and Machinability of Materials, 3, 250-262 (2008)
P. Belotti, M.C. Pinar, "Optimal Oblivious Routing under Linear and Ellipsoidal Uncertainty", Optimization and Engineering, 9, 257-271 (2008)
M.C. Pinar, "Sharpe-ratio pricing and hedging of contingent claims in incomplete markets by convex programming", Automatica, 44, 2063-2073 (2008)
I. Sabuncuoglu, Y. Gocgun, E. Erel, "Backtracking and exchange of information: Methods to enhance a beam search algorithm for assembly line scheduling", European J of Operational Research, 186, 915-930 (2008)
S. Goren, I. Sabuncuoglu, "Robustness and Stability Measures for Scheduling: Single Machine Environment", IIE Transactions, 40, 66-83 (2008)
A. Sen, "The U.S. fashion industry: a supply chain review", Int J of Production Economics, 114, 571-593 (2008)
H. Yaman, A. Sen, "Manufacturer's mixed pallet design problem", European J of Operational Research, 186, 826-840 (2008)
A. Toptal, S. Cetinkaya, "Quantifying the value of buyer-vendor coordination: Analytical and numerical results under different replenishment cost structures", European J of Operational Research, 187, 785-805 (2008)
J. Christophe, S. Dewez, J. Doignon, G. Fasbender, P. Gregorie, D. Huygens, M. Labbe, S. Elloumi, H. Melot, H. Yaman, "Linear inequalities among graph invariants: using GraPHedron to uncover optimal relationships", Networks, 52, 287-298 (2008)
M. Labbe, H. Yaman, "Solving the Hub Location Problem in a Star-Star Network", Networks, 51, 19-33 (2008)
H. Yaman, "Star p-hub Median Problem with Modular Arc Capacities", Computers and Operations Research, 35, 3009-3019 (2008)
E. John, E.A. Yildirim, "Implementation of Warm-Start Strategies in Interior-Point Methods for Linear Programming", Computational Optimization and Applications, 41, 151-183 (2008)
P. Kumar, E.A. Yildirim, "Computing Minimum-Volume Enclosing Axis-Aligned Ellipsoids", J of Optimization Theory and Applications, 136, 211-228 (2008)
E.A. Yildirim, "Two Algorithms for the Minimum Enclosing Ball Problem", SIAM J on Optimization, 19, 1368-1391 (2008)
S.D. Ahipasaoglu, E.A. Yildirim, "Identification and Elimination of Interior Points for the Minimum Enclosing Ball Problem", SIAM J on Optimization, 19, 1392-1396 (2008)
2007
M.S. Akturk, S. Gurel, "Machining Conditions Based Preventive Maintenance", Int J of Production Research, 45, 1725-1743 (2007)
A. Turkcan, M.S. Akturk, R.H. Storer, "Due-date and Cost-based FMS Loading, Scheduling and Tool Management", Int J of Production Research, 45, 1183-1213 (2007)
M.S. Akturk, J.B. Ghosh, R.K. Kayan, "Scheduling with tool changes to minimize total completion time under controllable machining conditions", Computers and Operations Research, 34, 2130-2146 (2007)
S. Gurel, M.S. Akturk, "Considering Manufacturing Cost and Scheduling Performance on a CNC Turning Machine", European J of Operational Research, 177, 325-343 (2007)
S. Gurel, M.S. Akturk, "Scheduling Parallel CNC Machines with Time/Cost Trade-off Considerations", Computers and Operations Research, 34, 2774-2789 (2007)
S. Gurel, M.S. Akturk, "Optimal Allocation and Processing Time Decisions on Non-identical Parallel CNC Machines: E-Constraint Approach", European J of Operational Research, 183, 591-607 (2007)
E. Erkut, O. Alp, "Designing a road network for hazardous materials shipments", Computers and Operations Research, 34, 1389-1405 (2007)
E. Erkut, O. Alp, "Integrated Routing and Scheduling of Hazmat Trucks with Stops En-Route", Transportation Science, 41, 107-122 (2007)
T. Tan, R. Gullu, N. Erkip, "Modelling imperfect advance demand information and analysis of optimal inventory policies", European J of Operational Research, 177, 897-923 (2007)
K. Gokbayrak, O. Selvi, "Constrained Optimal Hybrid Control of a Flow Shop System", IEEE Trans on Automatic Control, 52, 2270-2281 (2007) PDF
E. Berk, U. Gurler, R.A. Levine, "Bayesian demand updating in lost sales newsvendor: a two moment approximation", European J of Operational Research, 182, 256-281 (2007)
Y. Jiang, J. Liu, "Multi-hoist cyclic scheduling with fixed processing and transfer times", IEEE Trans on Automation Science and Engineering, 4, 435-450 (2007) PDF
P. Tan, B.Y. Kara, "A Hub Covering Model for Cargo Delivery Systems", Networks, 49, 28-39 (2007)
E. Emek, B.Y. Kara, "Hazardous waste management problem: The case for incineration", Computers and Operations Research, 34, 1424-1441 (2007)
O. Berman, V. Verter, B.Y. Kara, "Designing emergency response networks for hazardous materials transportation", Computers and Operations Research, 34, 1374-1388 (2007)
S. Alumur, B.Y. Kara, "A New Model on Hazardous Waste Location-Routing Problem", Computers and Operations Research, 34, 1406-1423 (2007)
H. Yaman, O.E. Karasan, M.C. Pinar, "Restricted Robust Uniform Matroid Maximization Under Interval Uncertainty", Mathematical Programming, 110, 431-441 (2007)
H. Gultekin, M.S. Akturk, O.E. Karasan, "Scheduling in a three-machine robotic flexible manufacturing cell", Computers and Operations Research, 34, 2463-2477 (2007)
T. Bektas, O. Oguz, "On seperating cover inequalities for the multidimensional knapsack problem", Computers and Operations Research, 34, 1771-1776 (2007)
T. Bektas, O. Oguz, I. Ouveysi, "Designing cost efficient content distribution networks", Computers and Operations Research, 34, 2436-2449 (2007)
T. Bektas, O. Oguz, I. Ouveysi, "A Lagrengean relaxation and decomposition algorithm for the video placement and routing problem", European J of Operational Research, 22, 103-107 (2007)
A. Altin, E. Amaldi, P. Belotti, M.C. Pinar, "Provisioning Virtual Private Networks under Traffic Uncertainty", Networks, 49, 100-115 (2007)
B. Ucar, C. Aykanat, M.C. Pinar, T. Malas, "Parallel Image Restoration by Surrogate Constraint Methods", J of Parallel and Distributed Computing, 67, 186-204 (2007)
K. Derinkuyu, M.C. Pinar, A. Camci, "An improved probability bound for the Approximate S-Lemma", Operations Research Letters, 35, 743-746 (2007)
M.C. Pinar, "Robust Scenario Optimization based on Downside-Risk Measure for Multi-period Portfolio Selection", OR Spectrum, 29, 295-309 (2007)
E. Erel, Y. Gocgun, I. Sabuncuoglu, "Mixed Model Assembly Line Sequencing Using Beam Search", Int J of Production Research, 45, 5265-5284 (2007)
G. Celik, I. Sabuncuoglu, "Simulation Modeling and Analysis of Border Security System", European J of Operational Research, 180, 1394-1410 (2007)
Y.L. Kocaga, A. Sen, "Spare parts inventory management with delivery lead times and rationing", IIE Transactions, 39, 879-898 (2007)
M.R. Taner, T.J. Hodgson, R.E. King, S.R. Schultz, "Satisfying Due-Dates in the Presence of Sequence Dependent Setups with a Special Comedown Structure", Computers and Industrial Engineering, 52, 57-70 (2007)
H. Yaman, B.Y. Kara, B.C. Tansel, "The Latest Arrival Hub Location Problem for Cargo Delivery Systems with Stopovers", Transportation Research B, 41, 906-919 (2007)
G. Erdogan, B. Tansel, "A Branch-and-Cut Algorithm foe Quadratic Assignment Problems based on Linarizations", Computers and Operations Research, 34, 1085-1106 (2007)
I. Akgun, B. Tansel, "Optimization of Transportation Requirements in the Deployment of Military Units", Computers and Operations Research, 34, 1158-1176 (2007)
H. Yaman, "The Integer Knapsack Cover Polyhedron", SIAM J on Discrete Mathematics, 21, 551-572 (2007)
M.J. Todd, E.A. Yildirim, "On Khachiyan's Algorithm for the Computation of Minimum-Volume Enclosing Ellipsoids", Discrete Applied Mathematics, 155, 1731-1744 (2007)
2006
M.S. Akturk, H.M. Yayla, "Management of Product Variety in Cellular Manufacturing Systems", Int J of Flexible Manufacturing Systems, 17, 93-117 (2006)
A.S. Erdem, M.M. Fadiloglu, S. Ozekici, "An EOQ Model with Multiple Suppliers and Random Capacity", Naval Research Logistics, 53, 101-114 (2006)
B.Y. Ozkaya, U. Gurler, E. Berk, "The stochastic joint replenishment problem: A new policy, analysis and insights", Naval Research Logistics, 53, 525-546 (2006)
H. Gultekin, M.S. Akturk, O.E. Karasan, "Cyclic scheduling of a 2-machine robotic cell with tooling constraints", European J of Operational Research, 174, 777-796 (2006)
T. Bektas, O. Oguz, I. Ouveysi, "A novel optimization algorithm for video placement and routing", IEEE Communication Letters, 10, 114-116 (2006) PDF
K. Derinkuyu, M.C. Pinar, "On the S-Procedure and Some Variants", Mathematical Methods of Operations Research, 64, 55-77 (2006)
M.C. Pinar, W.M. Hartmann, "Huber Approximation for the Nonlinear l1 Problem", European J of Operational Research, 109, 1096-1107 (2006)
F.A. Ozsoy, M.C. Pinar, "An Exact Algorithm for the Capacitated Vertex p-Center Problem", Computers and Operations Research, 33, 1420-1436 (2006)
M.C. Pinar, M. Teboulle, "On Semi-definite Bounds for Maximization of a Non-Convex Quadratic Objective over the L1-Unit Ball", RAIRO Operations Research, 40, 253-265 (2006)
I. Sabuncuoglu, E. Erel, Y. Gockun, "Analysis of Serial Production Lines: Characterization Study and a New Heuristic Procedure for Optimal Buffer Allocation", Int J of Production Research, 44, 2499-2523 (2006)
B. Sandikci, I. Sabuncuoglu, "Analysis of the Behavior of Transient Period in Non-Terminating Simulations", European J of Operational Research, 173, 252-267 (2006)
G. Erdogan, B.C. Tansel, "A Note on a Polynomial Time Solvable Case of the Quadratic Assignment Problem", Discrete Optimization, 3, 380-382 (2006)
A. Toptal, S. Cetinkaya, "Contractual Agreements for Coordination and Vendor-Managed Delivery under Explicit Transportation Considerations", Naval Research Logistics, 53, 397-417 (2006)
H. Yaman, "Formulations and Valid Inequalities for the Heterogeneous Vehicle Routing Problem", Mathematical Programming, 106, 365-390 (2006)
M. Labbe, H. Yaman, "Polyhedral Analysis for Concentrator Location Problems", Computational Optimization and Applications, 34, 377-407 (2006)
E.A. Yildirim, X.F. Orzechowski, "On Extracting Maximum Stable Sets in Perfect Graphs Using Lovasz's Theta Function", Computational Optimization and Applications, 33, 229-247 (2006)
E.A. Yildirim, "On the Minimum Volume Covering Ellipsoid of Ellipsoids", SIAM J on Optimization, 17, 621-641 (2006)
2005
R.K. Kayan, S. Akturk, "A New Bounding Mechanism for the CNC Machine Scheduling Problems with Controllable Processing Times", European J of Operational Research, 167, 624-643 (2005)
R. Gullu, G.J.J.A.N. van Houtum, Z. Alisan, N. Erkip, "Analysis of a decentralized supply chain under partial cooperation", Manufacturing and Service Operations Management, 7, 229-247 (2005)
J. Liu, Y. Jiang, "An Efficient Optimal Solution to the Two-Hoist No-Wait Cyclic Scheduling Problem", Operations Research, 53, 313-327 (2005)
M.S. Akturk, H. Gultekin, O.E. Karasan, "Robotic cell scheduling with operational flexibility", Discrete Applied Mathematics, 145, 334-348 (2005)
M.C. Pinar, R. Tutuncu, "Robust Profit Opportunities in Risky Financial Portfolios", Operations Research Letters, 33, 331-340 (2005)
E. Erel, I. Sabuncuoglu, H. Sekerci, "Stochastic assembly Line Balancing using Beam Search", Int J of Production Research, 43, 1411-1426 (2005)
I. Sabuncuoglu, A. Hatip, "The Turkish Army Uses Simulation to Model and Optimize Its Fuel-Supply System", Interfaces, 35, 474-482 (2005)
S. Muslum, I. Sabuncuoglu, "Evaluation of Mobilization and Deployment Plan of an Armored Battalion", Military Operations Research, 10, 43-63 (2005)
M.H. Demir, B.C. Tansel, G.F. Scheuenstuhl, "Tree Network 1 Median Location Problem with Interval Data - A Parameter Space Based Approach", IIE Transactions, 37, 429-439 (2005)
M. Labbe, H. Yaman, E. Gourdin, "A Branch and Cut Algorithm for Hub Location Problems with Single Assignment", Mathematical Programming, 102, 371-405 (2005)
H. Yaman, G. Carello, "Solving the Hub Location Problem with Modular link Capacities", Computers and Operations Research, 32, 3227-3245 (2005)
H. Yaman, "Polyhedral Analysis for the Uncapacitated Hub Location Problem with Modular Arc Capacities", SIAM J on Discrete Mathematics, 19, 501-522 (2005)
E.D. Gunes, H. Yaman, "Modeling Change in a Health System: Implications on Patient Flows and Resource Allocations", Clinical and Investigative Medicine, 28, 331-333 (2005)
2004
M.S. Akturk, J.B. Ghosh, E.D. Gunes, "Scheduling with tool changes to minimize total completion time: Basic results and SPT performance", European J of Operational Research, 157, 784-790 (2004)
A. Dogramaci, N.M. Fraiman, "Replacement Decisions with Maintenance Under Uncertainty: An Imbedded Optimal Control Model", Operations Research, 52, 785-794 (2004)
B. Kara, V. Verter, "Designing a Road Network for Hazardous Materials Transportation", Transportation Science, 38, 188-196 (2004)
M.C. Pinar, "A Note in Robust 0-1 Optimization with Uncertain Cost Coefficients", 4OR Q J of Belgian, French and Italian Oper Res Soc, 2, 309-316 (2004)
M.C. Pinar, "Finite Computation of the L1 Estimator from Huber's M-Estimator in Linear Regression", Computing, 72, 365-384 (2004)
M.C. Pinar, "Sufficient Global Optimality Conditions for Bivalent Quadratic Optimization", J of Optimization Theory and Applications, 122, 433-440 (2004)
M.C. Pinar, O. Arikan, "On Robust Solutions to Linear Least Squares Problems Affected by Data Uncertainty and Implementation Errors with Application to Stochastic Signal Modeling", Linear Algebra and Its Applications, 391, 223-243 (2004)
E. Erel, I. Sabuncuoglu, G. Kok, "Analyses of Serial Production Line Systems for Interdeparture Time Variability and WIP Inventory Systems", Int J of Quantitative Operations Management, 10, 43-63 (2004)
O. Boyabatli, I. Sabuncuoglu, "Parameter Selection in Genetic Algorithms", J of Systemics, Cybernetics and Informatics, 2.
E. Tekin, I. Sabuncuoglu, "Simulation Optimization: A Comprehensive Review on Theory and applications", IIE Transactions, 36, 1067-1081 (2004)
S.R. Schultz, T.J. Hodgson, R.E. King, M.R. Taner, "Minimizing Lmax for the single machine scheduling problem with family set-ups", Int J of Production Research, 42, 4315-4330 (2004)
M. Labbe, H. Yaman, "Projecting the Flow Variables for Hub Location Problems", Networks, 44, 84-93 (2004)
H. Yaman, "Concentrator location in telecommunications", 4OR Q J of Belgian, French and Italian Oper Res Soc, 2, 175-177 (2004)
2003
M.S. Akturk, J.B. Ghosh, E.D. Gunes, "Scheduling with tool changes to minimize total completion time: A study of heuristics and their performance", Naval Research Logistics, 50, 15-30 (2003)
A. Turkcan, M.S. Akturk, R.H. Storer, "Nonidentical Parallel CNC Machine Scheduling", Int J of Production Research, 41, 2143-2168 (2003)
F. Erhun, M.S. Akturk, A. Turkcan, "Interaction of design and operational parameters in periodic review kanban systems", Int J of Production Research, 41, 3315-3338 (2003)
A. Turkcan, M.S. Akturk, "A Problem Space Genetic Algorithm in Multi-objective Optimization", J of Intelligent Manufacturing, 14, 363-378 (2003)
S. Avci, M.S. Akturk, R.H. Storer, "A problem space algorithm for single machine weighted tardiness problems", IIE Transactions, 35, 479-486 (2003)
V.V. Anisimov, U. Gurler, "An Approximate Analytical Method of Analysis of a threshold maintenance policy for a multiphase multicomponent Model", Cybernetics and Systems Analysis, 39, 325-327 (2003)
I. Gijbels, U. Gurler, "Estimation in Change Point Models for Hazard Function with Censored Data", Lifetime Data Analysis, 9, 395-411 (2003)
U. Gurler, B. Yuksel-Ozkaya, "A note on: Continuous review perishable inventory systems: models and heuristics", IIE Transactions, 35, 321-323 (2003)
B. Kara, E. Erkut, V. Verter, "Accurate Calculation of Hazardous Materials Transport Risks", Operations Research Letters, 31, 285-292 (2003)
B. Kara, B. Tansel, "The single assignment hub covering problem: Models and Linearizations", J of Operational Research Society, 54, 59-64 (2003)
I. Ouveysi, A. Wirth, A. Yeh, O. Oguz, "Large Scale Linear Programs and Heuristics for the Design of Survivable Telecommunication Networks", Annals of Operations Research, 124, 285-293 (2003)
A. Altay-Salih, M.C. Pinar, S. Leyffer, "Constrained Nonlinear Programming for Volatility Estimation with GARCH Models", SIAM Review, 45, 485-503 (2003)
M.C. Pinar, "A Derivation of Lovasz Theta via Augmented Lagrange Duality", RAIRO Operations Research, 37, 17-27 (2003)
I. Sabuncuoglu, O.B. Kizilisik, "Reactive scheduling in a dynamic and stochastic FMS environment", Int J of Production Research, 41, 4211-4231 (2003)
I. Sabuncuoglu, M. Lahmar, "An Evaluative Study of Operation Grouping Policies in an FMS: An Simulation Study", Int J of Flexible Manufacturing Systems, 15, 217-239 (2003)
M.R. Taner, T.J. Hodgson, R.E. King, K.A. Thoney, "Satisfying due-dates in a job shop with sequence-dependent family set-ups", Int J of Production Research, 41, 4153-4169 (2003)
2002
M.S. Akturk, S. Onen, "Dynamic lot sizing and tool management in automated manufacturing systems", Computers and Operations Research, 29, 1059-1079 (2002)
V.V. Anisimov, "Averaging in Markov models with fast Markov switches and applications to queueing models", Annals of Operations Research, 112, 63-82 (2002)
V.V. Anisimov, J.R. Artalejo, "Approximation of multiserver retrial queues by means of generalized truncated models", Top, 10, 51-66 (2002)
Z.M. Avsar, M. Baykal-Gursoy, "Inventory Control under Substituable Demand: A Stochastic Game Application", Naval Research Logistics, 49, 359-375 (2002)
M.M. Fadiloglu, S. Yeralan, "Models of production lines as quasi-birth-death processes", Mathematical and Computer Modelling, 35, 913-930 (2002)
S. Dayanik, U. Gurler, "An adaptive Bayesian replacement policy with minimal repair", Operations Research, 50, 552-558 (2002)
U. Gurler, A. Kaya, "A Maintenance Policy for a System with Multi-State Components: An Approximate Solution", Reliability Engineering and System Safety, 76, 117-127 (2002)
E. Karasan, O.E. Karasan, N. Akar, M.C. Pinar, "Mesh topology design in overlay virtual private networks", Electronics Letters, 38, 939-941 (2002)
O. Oguz, "Generalized Column Generation for Linear Programming", Management Science, 48, 444-452 (2002)
M.C. Pinar, "A Global Error Bound for Quadratic Perturbation of Linear Programs", Applied Mathematics Letters, 15, 367-370 (2002)
M.C. Pinar, "Linear Huber M-Estimator under Ellipsoidal Data Uncertainty", BIT, 42, 856-866 (2002)
T. Lejmi, I. Sabuncuoglu, "Effect of Load and Processing Time variation on the Effectiveness of Scheduling Rules", Int J of Production Research, 40, 945-974 (2002)
I. Sabuncuoglu, S. Touhami, "Simulation Metamodeling with Neural networks: An Experimental Investigation", Int J of Production Research, 40, 2483-2505 (2002)
I. Sabuncuoglu, A. Comlekci, "Operation-based flow-time estimation in dynamic job shops", Omega - Int J of Management Science, 30, 423-442 (2002)
I. Sabuncuoglu, E. Erel, G. Kok, "Analysis of assembly systems for interdeparture time variability and throughput", IIE Transactions, 34, 23-40 (2002)
O. Nuhut, I. Sabuncuoglu, "Simulation analysis of army casuality evacuations", Simulation, 78, 612-625 (2002)
M.S. Akturk, S. Ozkan, "Integrated Scheduling and Tool Management in Flexible Manufacturing Systems", Int J of Production Research, 39, 2697-2722 (2001)
M.S. Akturk, D. Ozdemir, "A new dominance rule to minimize total weighted tardiness with unequal release dates", European J Operational Research, 135, 394-412 (2001)
V.V. Anisimov, "Limit theorems for switching processes and applications to queueing models", J of Engineering Simulation, 23, 22-34 (2001)
V.V. Anisimov, "Convergence of switching reward processes", Theory, Probability and Mathematical Statistics, 63, 1-11 (2001)
V.V. Anisimov, M. Kurtulus, "Markov retrial queueing models in light traffic conditions", Cybernetics and Systems Analysis, 36.
V. Verter, B. Kara, "A GIS-based Framework for Hazardous Materials Transport Risk Assessment", Risk Analysis, 21, 1109-1120 (2001)
M.M. Fadiloglu, S. Yeralan, "A general theory on spectral properties of state-homogeneous finite-state quasi-birth-death process", European J Operational Research, 128, 402-417 (2001)
E. Tekin, U. Gurler, E. Berk, "Age-based vs. stock level control policies for a perishable inventory system", European J Operational Research, 134, 309-329 (2001)
H. Yaman, O.E. Karasan, M.C. Pinar, "The robust spanning tree problem with interval data", Operations Research Letters, 29, 31-40 (2001)
E. Erel, I. Sabuncuoglu, B.A. Aksu, "Balancing of U-type assembly systems using simulated annealing", Int J of Production Research, 39, 3003-3015 (2001)
E. Kutanoglu, I. Sabuncuoglu, "Experimental Investigation of Iterative Simulation-based Scheduling in Dynamic and Stochastic Job Shop", Int J of Production Research, 20, 264-279 (2001)
E. Kutanoglu, I. Sabuncuoglu, "Routing-based Reactive Scheduling Policies for Machine Failures in Job Shops", Int J of Production Research, 39, 3141-3158 (2001)
B.Y. Kara, B. Tansel, "The Latest Hub Location Problem", Management Science, 47, 1408-1420 (2001)
B.C. Tansel, B.Y. Kara, I. Sabuncuoglu, "An efficient algorithm for the single machine total tardiness scheduling problem", IIE Transactions, 33, 661-674 (2001)
V.V. Anisimov, J.R Artalejo, "Analysis of Markov multiserver retrial queues with negative arrivals", Queuing Systems, 39, 157-182 (2001)
2000
M.S. Akturk, A. Turkcan, "Cellular manufacturing system design using a holonistic approach", Int J of Production Research, 38, 2327-2347 (2000)
M.S. Akturk, D. Ozdemir, "An exact approach to minimizing total weighted tardiness with release dates", IIE Transactions, 32, 1091-1101 (2000)
V.V. Anisimov, G. Pflug, "Z-theorems: limits of stochastic equations", Bernoulli, 6, 917-938 (2000)
V.V. Anisimov, H. Kaibah, "The asymptotic properties of estimates of the parameters of nonlinear time series", Cybernetics and Systems Analysis, 36, 203-211 (2000)
V.V. Anisimov, Y. Klygunova, "Characterization of exit times and aggregation models for finite Markov chains in terms of global memory functionals", Cybernetics and Systems Analysis, 36, 110-120 (2000)
C. Dincer, B. Deler, "On the distribution of throughput of transfer lines", J of Operational Research Society, 51, 1170-1178 (2000)
U. Gurler, K. Prewitt, "Bivariate density estimation with randomly truncated data", J of Multivariate Analysis, 74, 88-115 (2000)
O. Ekin, P.L. Hammer, A. Kogan, "Convexity and logical analysis of data", Theoretical Computer Science, 244, 95-116 (2000)
O. Ekin, S. Foldes, P.L. Hammer, L. Hellerstein, "Equational characterization of Boolean function classes", Discrete Mathematics, 211, 27-51 (2000)
E. Boros, Y. Crama, O. Ekin, P.L. Hammer, T. Iberaki, A. Kogan, "Boolean normal forms, shellability and reliability computations", SIAM J on Discrete Mathematics, 13, 212-226 (2000)
O. Oguz, "Bounds on the opportunity cost of neglecting re-optimization in mathematical programming", Management Science, 46, 1009-1012 (2000)
M.C. Pinar, "A simple duality proof in convex quadratic programming with a quadratic constraint, and some applications", European J Operational Research, 124, 151-158 (2000)
U. Gurler, M.C. Pinar, M.M. Jelassi, "On closed-form solutions of a resource allocation problem in parallel funding of R&D projects", Operations Research Letters, 27, 229-234 (2000)
I. Sabuncuoglu, H.Y. Karapinar, "A load based and due-date oriented approach to order review/release in job shops", Decision Sciences, 31, 413-447 (2000)
I. Sabuncuoglu, E. Erel, M. Tanyer, "Assembly line balancing using genetic algorithms", J of Intelligent Manufacturing, 11, 295-310 (2000)
I. Sabuncuoglu, M. Bayiz, "Analysis of reactive scheduling problems in a job shop environment", European J Operational Research, 126, 567-586 (2000)
A. Yilmaz, I. Sabuncuoglu, "Input data analysis using neural networks", Simulation, 74, 128-137 (2000)
B.Y. Kara, B.C. Tansel, "On the single assignment p-Hub center problem", European J Operational Research, 125, 648-655 (2000)
B. Bozkaya, B.C. Tansel, "A spanning tree approach to the absolute p-center problem", Computers and Operations Research, 6, 83-107 (2000)
1999
M.S. Akturk, "An exact tool allocation approach for CNC machines", Int J of Computer Integrated Manufacturing, 2, 129-140 (1999)
M.S. Akturk, F. Erhun, "An overview of design and operational issues of kanban systems[reprinted in May 2004 issue of ICFAI Journal of Operations Management]", Int J of Production Research, 37, 3859-3881 (1999)
M.S. Akturk, M.B. Yildirim, "A new dominance rule for the total weighted tardiness problem", Production Planning and Control, 10, 138-149 (1999)
M.S. Akturk, K. Kilic, "Generating short-term observation schedules for space mission projects", J of Intelligent Manufacturing, 10, 387-404 (1999)
M.S. Akturk, E. Gorgulu, "Match-up scheduling under a machine breakdown", European J Operational Research, 112, 80-96 (1999)
M.S. Akturk, S. Onen, "Joint lot sizing and tool management in a CNC environment", Computers in Industry, 40, 61-75 (1999)
V.V. Anisimov, "Averaging methods for transient regimes in overloading retrial queueing systems", Mathematical and Computer Modelling, 30, 65-78 (1999)
V.V. Anisimov, "Switching stochastic models and applications in retrial queues", J of Spanish Statistical and Operations Research Society, 7, 169-186 (1999)
N. Kirkavak, C. Dincer, "The general behavior of pull production systems: The allocation problems", European J Operational Research, 119, 479-494 (1999)
K. Prewitt, U. Gurler, "Variance of the bivariate density estimator for left truncated right censored data", Statistics and Probability Letters, 45, 351-358 (1999)
O. Ekin, P.L. Hammer, A. Kogan, P. Winter, "Distance-based classification methods", INFOR, 37, 337-352 (1999)
O. Ekin, P.L. Hammer, A. Kogan, "On connected Boolean functions", Discrete Applied Mathematics, 97, 337-362 (1999)
K. Madsen, H.B. Nielsen, M.C. Pinar, "Bound constrained quadratic programming via piecewise quadratic functions", Mathematical Programming, 85, 135-156 (1999)
M.C. Pinar, B. Chen, "l_{1} solution of linear inequalities", IMA J of Numerical Analysis, 19, 19-37 (1999)
B. Chen, P. Harker, M.C. Pinar, "Continuation method for nonlinear complementarity problems via normal maps", European J Operational Research, 116, 591-606 (1999)
M.C. Pinar, "A characterization of the optimal set of linear programs based on the augmented Lagrangian", J of Information and Optimization Sciences, 20, 299-308 (1999)
K. Madsen, H.B. Nielsen, M.C. Pinar, "A finite continuation algorithm for bound constrained quadratic programming", SIAM J on Optimization, 9, 62-83 (1999)
E. Kutanoglu, I. Sabuncuoglu, "An analysis of heuristics in a dynamic job shop with weighted tardiness objectives", Int J of Production Research, 37, 165-187 (1999)
I. Sabuncuoglu, H.Y. Karapinar, "Analysis of order review/release problems in production systems", Int J of Production Economics, 62, 259-279 (1999)
I. Sabuncuoglu, M. Bayiz, "Job shop scheduling with beam search", European J Operational Research, 118, 390-412 (1999)
I. Sabuncuoglu, S. Karabuk, "Rescheduling frequency in an FMS with uncertain processing times and unreliable machines", J of Manufacturing Systems, 18, 1-16 (1999)
I. Sabuncuoglu, T. Lejmi, "Scheduling for non regular performance measure under the due window approach", Omega - Int J of Management Science, 27, 555-568 (1999)
Z.M. Avsar, M. Baykal-Gursoy, "A decomposition approach for undiscounted two-person zero-sum stochastic games", Mathematical Methods of Operations Research, 49, 483-500 (1999)
1998
M.S. Akturk, G.R. Wilson, "A hierarchical model for the cell loading problem of cellular manufacturing systems", Int J of Production Research, 36, 2005-2023 (1998)
M.S. Akturk, M.B. Yildirim, "A new lower bounding scheme for the total weighted tardiness problem", Computers and Operations Research, 25, 265-278 (1998)
V.V. Anisimov, "Asymptotic analysis of nonhomogenous hierarchic Markov processes and applications to merging models in queueing systems", Theory, Probability and Mathematical Statistics, 56, 48-60 (1998)
V.V. Anisimov, A.V. Naidionova, "Diffusion approximation of nonhomogenous switching processes and applications to the analysis of the rate of convergence of computing procedures", Cybernetics and Systems Analysis, 2, 97-104 (1998)
A. Sen, O. Benli, "Lot streaming in open shops", Operations Research Letters, 23, 135-142 (1998)
A. Sen, E. Topaloglu, O. Benli, "Optimal streaming of a single job in a two-stage flow shop", European J Operational Research, 110, 42-62 (1998)
I. Gijbels, U. Gurler, "Covariance function of a bivariate distribution function estimator for left truncated and right sensored data", Statistica Sinica, 8, 1219-1232 (1998)
H.M. Ozaktas, M.C. Pinar, M. Akgul, "Restoration of space-variant global blurs caused by severe camera movements and coordinate distortions", J of Optics, 29, 303-310 (1998)
M.C. Pinar, "Newton's method for linear inequality systems", European J Operational Research, 107, 710-719 (1998)
M.C. Pinar, S. Elhedhli, "A penalty continuation method for the l_{oo} solution of overdetermined linear systems", BIT, 38, 127-150 (1998)
B. Chen, M.C. Pinar, "On Newton's method for Huber's robust M-estimation problems in linear regression", BIT, 38, 674-684 (1998)
I. Sabuncuoglu, "A study on scheduling rules of flexible manufacturing systems: A simulation approach", Int J of Production Research, 36, 527-546 (1998)
I. Sabuncuoglu, "Scheduling with Neural Networks - A review of the Literature and New Research Directions", Production Planning and Inventory Control, 9, 2-12 (1998)
I. Sabuncuoglu, S. Karabuk, "A beam search based algorithm and evaluation of scheduling approaches", IIE Transactions, 30, 179-191 (1998)
B.C. Tansel, C. Bilen, "Move based heuristics for the unidirectional loop network layout problem", European J Operational Research, 108, 36-48 (1998)
1997
U. Gurler, M. Parlar, "An Inventory Problem with Two Randomly Available Suppliers", Operations Research, 45, 904-918 (1997)
U. Gurler, "Bivariate distribution and the hazard functions when a component is randomly truncated", J of Multivariate Analysis, 60, 20-47 (1997)
U. Gurler, "On testing independence with right truncated data", Nonlinear analysis:Theory, methods and applications, 30, 3201-3206 (1997) PDF
M.C. Pinar, "Piecewise linear pathways to the optimal solution set in linear programming", J of Optimization Theory and Applications, 93, 619-634 (1997)
M.C. Pinar, "Duality in robust linear regression using Huber's M-estimator", Applied Mathematics Letters, 10, 65-70 (1997)
B.C. Tansel, I. Sabuncuoglu, "New insights on the single machine total tardiness problem", J of Operational Research Society, 48, 82-89 (1997)
1996
A. Gill, G.K. Adil, C.R. Bector, "An equipment replacement problem with dynamic production planning and capacity considerations", Int J of Systems Science, 27, 985-988 (1996)
M.S. Akturk, "A note on the within-cell layout problem based on operation sequences", Production Planning and Control, 7, 99-103 (1996)
M.S. Akturk, H.O. Balkose, "Part-machine Grouping Using a Multi-objective Cluster Analysis", Int J of Production Research, 34, 2299-2315 (1996)
M.S. Akturk, M. Yilmaz, "Scheduling of Automated Guided Vehicles in a Decision Making Hierarchy", Int J of Production Research, 34, 577-591 (1996)
M.S. Akturk, S. Avci, "Tool Allocation and Machining Conditions Optimization for CNC Machines", European J Operational Research, 94, 335-348 (1996)
S. Avci, M.S. Akturk, "Tool magazine arrangement and operation sequencing on CNC machines", Computers and Operations Research, 23, 1069-1081 (1996)
M.S. Akturk, I. Durusoy, "Joint economic lot-sizing approach to the just-in-time purchasing problem", Trans on Operational Research, 8, 77-95 (1996)
M.S. Akturk, S. Avci, "An integrated process planning approach to CNC machine tools", Int J of Advanced Manufacturing Technology, 12, 221-229 (1996)
N. Kirkavak, C. Dincer, "Performance Evaluation models for single-item Periodic Pull Production Systems", J of Operational Research Society, 47, 239-250 (1996)
U. Gurler, "Bivariate Estimation with Right Truncated Data", J of American Statistical Association, 91, 1152-1165 (1996)
U. Gurler, M.M. Siddiqui, "On the consistency of a two sample matching test", Nonparametric Statistics, 7, 69-73 (1996)
M.C. Pinar, "Linear programming via a quadratic penalty function", Mathematical Methods of Operations Research, 44, 345-370 (1996)
K. Madsen, H.B. Nielsen, M.C. Pinar, "A new finite continuation algorithm for linear programming", SIAM J on Optimization, 6, 600-616 (1996)
I. Sabuncuoglu, B. Gurgun, "A Neural Network Model for Scheduling Problems", European J Operational Research, 93, 288-299 (1996)
B.C. Tansel, G.N. Yesilkokcen, "Composite regions of feasibility for certain classes of distance constrained network location problems", Transportation Science, 30, 148--159 (1996)
1995
M.S. Akturk, O. Daglioglugil, "Dynamic lot-sizing and scheduling in cellular manufacturing systems using hybrid simulation/analytic model", Int J of Industrial Engineering, 2, 251-260 (1995)
V. Verter, M.C. Dincer, "Facility location and capacity acquisition: an integrated approach", Naval Research Logistics, 42, 1141-1160 (1995)
O. Oguz, M.J. Magazine, "A stability concept for zero-one knapsack problems and approximation algorithms", Information Systems and Operations Research, 33, 123-132 (1995)
I. Sabuncuoglu, D.L. Hommertzheim, "Experimental investigations of an {FMS} due date scheduling problem: an evaluation of due-date assignment rules", Int J of Computer Integrated Manufacturing, 8, 133-144 (1995)
1994
C. Oguz, C. Dincer, "Single machine earliness-tardiness scheduling problems using the equal-slack rule", J of Operational Research Society, 45, 589--594 (1994)
M.M. Siddiqui, M. Caglar, "Residual lifetime distribution and its applications", Microelectronics and Reliability, 34, 211-227 (1994)
L. Kandiller, "A comparative study of cell formation in cellular manufacturing systems", Int J of Production Research, 32, 2395-2429 (1994)
B. Vizvari, F. Yilmaz, "An ordering (enumerative) algorithm for nonlinear 0-1 programming", J Global Optimization, 5, 277-290 (1994)
O. Oguz, H. Bala, "A comparative study of computational procedures for the resource constrained project scheduling problem", European J Operational Research, 72, 406-416 (1994)
K. Madsen, H.B. Nielsen, M.C. Pinar, "New characterizations of the l1 solution to overdetermined systems of linear equations", Operations Research Letters, 16, 159-166 (1994)
1993
N. Kirkavak, C. Dincer, "Analytical Loading models in Flexible manufacturing systems", European J Operational Research, 71, 17-31 (1993)
U. Gurler, W. Stute, J.-L. Wang, "Weak and strong quantile representations for randomly truncated data with applications", Statistics and Probability Letters, 17, 139-148 (1993)
U. Gurler, J.-L. Wang, "Nonparametric estimation of hazard functions and their derivatives under truncation model", Annals of the Institute of Statistical Mathematics, 45, 249-264 (1993)
U. Gurler, J.-L. Wang, "On the Hajek projection for truncated and censored data", Sankhya: The Indian J of Statistics, 55, 66-79 (1993)